CLIMB
ZIP
JUMP
Engineering Epic Adventures Since 2008
TRU-ALERT Height Sensor
€300.00 (ex VAT)
Catch mistakes before they happen (even when climbers aren’t clipped in). Our harness-based height sensor detects when an unprotected climber reaches an unsafe height.
When a user climbs higher than ~2.5m without clipping into the auto belay connector, TRU-ALERT emits audio and visual warnings, alerting staff and other users to the potential danger.
An additional order of at least 5 Reset Remotes is suggested for optimal performance, though more may be needed depending on the size of facilities.
Our harness-based height sensor detects when an unprotected climber reaches an unsafe height.
The TRU-ALERT Height Sensor will also detect slack in the webbing line from the harness during climbing.
When either scenario is detected – an unprotected climber or excessive slack – and the user is ~2.5m above ground level, the TRU-ALERT Height Sensor activates height warning for 5 seconds. This allows the climber to downclimb to a safe level or correct the slack issue. If the issue is not corrected within 5 seconds, the TRU-ALERT Height Sensor activates a safety alarm until it’s reset.
The height sensor works best with sequenced connectors, including our TRU-CLIP Connector. It’s also compatible with Belay Mate and Self Belay connectors.
Every TRU-ALERT order includes:
- 1 alarm (30% charged)
- 1 of each sequenced connector attachment bracket
- 1 hook and loop harness attachment strap
- 2 wire wraps
- 1 USB-C charging cable
An additional order of at least 5 Reset Remotes is suggested for optimal performance, though more may be needed depending on the size of facilities.
⚠️WARNING: This product can expose you to Urethane (Ethyl Carbamate), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
See What Others Have to Say
